Tool kit hook

Moderators: Steve 155C, Lashman, Keith Halstead

Tool kit hook

Postby madanorak » Wed Jun 21, 2017 10:24 pm

Hi all,

I'm after a tool kit hook for a LC Mk2. Mine is long gone so if any one has got a spare, or could anybody send my a photo of what it looks like with dimensions so I could make my own, that would be good.

Many thanks.
madanorak
Learner Driver
 
Posts: 6
Joined: Sun Jun 11, 2017 10:02 pm
LCR Membership Number: 0

Re: Tool kit hook

Postby Lansdown » Thu Jun 22, 2017 11:35 am

Is this what you are after?


Image
User avatar
Lansdown
Regular
 
Posts: 185
Joined: Sat Oct 16, 2010 12:00 am
Location: Gloucestershire
LCR Membership Number: 2272

Re: Tool kit hook

Postby madanorak » Thu Jun 22, 2017 3:44 pm

That's the beastie, is that a spare you would sell, if not if you could give me the dimensions of mounting bracket,it's hole diameter and the hook itself then I can make one. A close up of the bracket would be nice, to see how it is folded, if that is possible.

I believe these were held in place with well nuts,(rubber mounted nut) is that correct?

Many thanks for your help.
madanorak
Learner Driver
 
Posts: 6
Joined: Sun Jun 11, 2017 10:02 pm
LCR Membership Number: 0

Re: Tool kit hook

Postby Lansdown » Thu Jun 22, 2017 4:38 pm

That's the one I fitted to my car a couple of years ago - not even sure now why I took a photo of it!!
I will try to get some better photo's and some dimensions over the weekend. I will check but I am pretty sure it just bolts to the spare wheel well with standard bolts etc. The rubber mounted nuts are used to secure the bungee cord (I think).

Regards
Lansdown (Bob)
User avatar
Lansdown
Regular
 
Posts: 185
Joined: Sat Oct 16, 2010 12:00 am
Location: Gloucestershire
LCR Membership Number: 2272

Re: Tool kit hook

Postby Lansdown » Fri Jun 23, 2017 1:47 pm

Hi,
Photo's below with some imperial dimensions. Best I can do I'm afraid. Hopefully you can roughly scale any other dimensions you need.
Regards
Lansdown (Bob)

Image


Image
User avatar
Lansdown
Regular
 
Posts: 185
Joined: Sat Oct 16, 2010 12:00 am
Location: Gloucestershire
LCR Membership Number: 2272

Re: Tool kit hook

Postby madanorak » Fri Jun 23, 2017 7:26 pm

Hi Bob,

I thought it was too good to think you had a spare, but what you've done and measured is perfect. I just need to get some correct thickness bar, and make one up.

Really grateful, and if our paths cross, I'll buy you a pint or two.

Regards

Kev
madanorak
Learner Driver
 
Posts: 6
Joined: Sun Jun 11, 2017 10:02 pm
LCR Membership Number: 0

Re: Tool kit hook

Postby Lansdown » Sat Jun 24, 2017 9:09 am

No problem - people on here were very helpful to me when I refurbished my Mk 2 LC.
If you are not a member it might be worth considering joining - you get access to all the forum then.
Regards
Lansdown (Bob)
User avatar
Lansdown
Regular
 
Posts: 185
Joined: Sat Oct 16, 2010 12:00 am
Location: Gloucestershire
LCR Membership Number: 2272

Re: Tool kit hook

Postby Steve 155C » Sat Jun 24, 2017 4:40 pm

LCR Member was making the bungy cord maybe he is also making the hook. Worth dropping him a message. I think his forum id is Dave C
User avatar
Steve 155C
Site Admin
 
Posts: 3568
Joined: Mon Nov 27, 2006 1:00 am
Location: West Sussex , UK
LCR Membership Number: 2037

Re: Tool kit hook

Postby GoLotus » Sun Jun 25, 2017 10:33 pm

Yup, much easier to buy one from Dave than it is to go making one
User avatar
GoLotus
Front wheel lifter
 
Posts: 310
Joined: Sun Mar 13, 2011 1:00 am
LCR Membership Number: 0

Re: Tool kit hook

Postby madanorak » Sun Jun 25, 2017 10:47 pm

Was a member years ago, old membership number was 699, it lapsed in 1985/86 when there was a lot of unrest in the club and too much politics. Will probably look into re joining, although am already in 2 other clubs, the Jensen Owners Club and Stourbridge Prewar and Classic Car Club.

Will contact Dave, thanks for all your help.
madanorak
Learner Driver
 
Posts: 6
Joined: Sun Jun 11, 2017 10:02 pm
LCR Membership Number: 0

Re: Tool kit hook

Postby madanorak » Tue Jun 27, 2017 8:24 am

Thanks all,

One is on its way to me from Dave,complete with bungee and fixings. Sorry to have wasted your efforts Bob, but the pint offer is still there if we cross paths.

Kev
madanorak
Learner Driver
 
Posts: 6
Joined: Sun Jun 11, 2017 10:02 pm
LCR Membership Number: 0

Re: Tool kit hook

Postby Lansdown » Wed Jun 28, 2017 10:58 am

No problem - glad you are sorted.
Bob
User avatar
Lansdown
Regular
 
Posts: 185
Joined: Sat Oct 16, 2010 12:00 am
Location: Gloucestershire
LCR Membership Number: 2272

Re: Tool kit hook

Postby madanorak » Thu Jun 29, 2017 9:34 pm

Hook arrived today, with bungee and fixings, looks good, so now will be stored away ready for fitting.
madanorak
Learner Driver
 
Posts: 6
Joined: Sun Jun 11, 2017 10:02 pm
LCR Membership Number: 0


Return to Open non-member section

Who is online

Users browsing this forum: No registered users and 2 guests

cron