Identification Plates

Moderators: Steve 155C, Lashman, Keith Halstead

Identification Plates

Postby Tomtecno » Mon Feb 05, 2018 1:50 pm

Where does the small identification plate (not the vin plate) fit on an airflow mk 1 and what information does it contain? My body shell has had new inner wing tops fitted but I still have the original plate and I need to refit it in the correct position so any info or photos would be great.
Tomtecno
Learner Driver
 
Posts: 13
Joined: Thu Jan 18, 2018 11:51 am
LCR Membership Number: 0

Re: Identification Plates

Postby Rick » Mon Feb 05, 2018 8:51 pm

Tomtecno wrote:Where does the small identification plate (not the vin plate) fit on an airflow mk 1 and what information does it contain? My body shell has had new inner wing tops fitted but I still have the original plate and I need to refit it in the correct position so any info or photos would be great.


Its the build plate which was attached at the start of the cars construction, it contains the designation code for a Lotus Cortina, whether its RHD or LHD and the consecutive number of the build,
User avatar
Rick
COMMITTEE MEMBER
 
Posts: 1492
Joined: Mon Dec 04, 2006 1:00 am
LCR Membership Number: 1292

Re: Identification Plates

Postby Tomtecno » Mon Feb 05, 2018 11:06 pm

That’s it Rick, thanks. Can you tell me where it should be placed?
Tomtecno
Learner Driver
 
Posts: 13
Joined: Thu Jan 18, 2018 11:51 am
LCR Membership Number: 0

Re: Identification Plates

Postby Keith Halstead » Tue Feb 06, 2018 11:38 am

It sits on the flat of the top plate on driver's side of the inner wing just behind the bonnet hinge.
You do not have the required permissions to view the files attached to this post.
User avatar
Keith Halstead
Moderator
 
Posts: 3749
Joined: Tue Nov 28, 2006 1:00 am
Location: Essex
LCR Membership Number: 1711

Re: Identification Plates

Postby Tomtecno » Tue Feb 06, 2018 12:53 pm

Thanks Keith.

Did you post a photo? If so, I can’t open it.
Tomtecno
Learner Driver
 
Posts: 13
Joined: Thu Jan 18, 2018 11:51 am
LCR Membership Number: 0

Re: Identification Plates

Postby Keith Halstead » Tue Feb 06, 2018 3:37 pm

Tomtecno wrote:Thanks Keith.

Did you post a photo? If so, I can’t open it.


Yes - I'll send an email if you give me an email id.
User avatar
Keith Halstead
Moderator
 
Posts: 3749
Joined: Tue Nov 28, 2006 1:00 am
Location: Essex
LCR Membership Number: 1711

Re: Identification Plates

Postby Tomtecno » Wed Feb 07, 2018 11:21 am

Hi Keith,

Email is smpdesign@hotmail.co.uk

Thanks
Tom
Tomtecno
Learner Driver
 
Posts: 13
Joined: Thu Jan 18, 2018 11:51 am
LCR Membership Number: 0

Re: Identification Plates

Postby Keith Halstead » Wed Feb 07, 2018 4:11 pm

Done Tom.
User avatar
Keith Halstead
Moderator
 
Posts: 3749
Joined: Tue Nov 28, 2006 1:00 am
Location: Essex
LCR Membership Number: 1711


Return to Open non-member section

Who is online

Users browsing this forum: No registered users and 1 guest